Unit 07 | Install configure, operate and maintain operating systems and network services

Module 07 | Install and configure operating system


Lecture Notes
- Compatibility of memory (RAM), storage, Video Graphic Array (VGA) and bit width (32 / 64) are checked against manufacturer’s and vendor’s specifications.
- Check resolution and video memory in checking Video Graphic Array (VGA) compatibility.
- Compatibility of the system against the software is ensured.
- Installation media and BIOS settings should be matched with existing devices.
- Hard disk should be partitioned according to the user requirement.
- Computer specification should be compatible with the selected operating system.
- Instruction should be given according to the user requirement when installation is in progress.
- OS should be activated / registered legally.
- OS should be running without any issues.
- Devices in the system should be identified by referring system information.
- The latest version of driver software should be acquired using Internet / CD. 
- Installed devices should work as per the manufacturer’s specifications.
- Latest antivirus software should be installed, if necessary.
- Necessary application software should be listed according to customer requirement and system compatibility.
- Latest version of selected software package should be acquired.
- Selected software should be installed following instructions appeared on the screen.
- The system should be restarted after each installation, if required.
- Installed software should be configured to the user requirement and activated according to the vendor’s guidelines.
- It is assured all installed software functioning properly. 
- Boot up and shutdown time should be within reasonable duration according to system specifications.
- Overall performance of the system should be as per the hardware profile.
 

1 Comments

Post a Comment